High-strength Rolled Plate
|Alloy||EN AW 7022 [AlZn5Mg3Cu]|
|Type of Alloy||heat treatable|
High-strength rolled plate CERTAL® is based on alloy EN AW 7022 (AlZn5Mg3Cu). Compared with other high-strength rolled plates, CERTAL® has a significantly lower strength and hardness decrease from plate edge to center and is therefore much more dimensionally stable than, for example, rolled plates made of EN AW 7075.
- Very high strength
- Good protective anodizing capability
- Very good machining properties
- Very good polishability
- Good dimensional stability
CERTAL® is often used for heavily-loaded anvil caps and punch retainers.
Device construction and mechanical engineering
Due to the very high strength, CERTAL® is preferred for use in workpiece clamping and machining devices.
Handling machines and industrial robots
If heavy loads have to be moved, CERTAL® has proven itself to be a high-strength material.
For drive units with very high power transmission, only high-strength materials can be used. In addition to strength, CERTAL® also offers good dimensional stability for this strength class.
If components show a very high degree of machining and they must be highly accurate, there can be a problem with warping when using rolled plates. This risk can be minimized if the processed component is subjected to stress relief annealing after the roughing operation at 140 ° C for 2 hours and only then is finished. rd.Wolf Nawratil, Technical Product Manager, GLEICH Aluminium
CERTAL® is a registered trademark of CONSTELLIUM S.A.
The higher-strength, six-sides saw cast plate in the alloy EN AW 7021 is characterized by its dimensional stability and its very low stress.Go to product
The higher strength DYNAMIC type of the alloy EN AW 7021. Free of microporosity. Is used in many pneumatic and hydraulic applications.Go to product